PC World

How to enable TPM 2.0 for Windows 11

What are TPM?

A TPM, or Trusted Platform Module, is a hardware-based security mechanism designed to keep cybercriminals out of users computer. Its microchips are efficient crypto processors, which are implementing innovation.

Some TPMs are virtualized or firmware-based, however a it is a chip that is installed on ones motherboard even during construction and is made to increase equipment integrity upon startup.


Since 2016, It has been required on Windows PCs, therefore devices earlier than it was then may lack the requisite equipment or architecture. Traditionally, Microsoft obliged replacement parts makers to verify that all PCs manufactured to run Windows 10 were TPM 1.2-capable. The much latest iteration of TPM-2.0 is recommended.


These are a source of contention between security professionals and organizations. It has been upgraded and activated is a powerful deterrent versus malware exploits, which have been on the increasing and also have drawn Microsoft’s notice.

It does, meanwhile, enable for find out the possible and may limit exactly the sort software that users system can execute. TPM-enabled systems aren’t usually delivered to nations wherever western cryptography is prohibited. TCM, China’s government substitute, is used. It employment is only permitted in Russia with the administration’s consent.

TPM 2.0 windows 11

The Trusted Platform Module version 2.0 is supported by the vast majority of PCs released in the last five years. TPM-2.0 is an essential building ingredient for protection functionality in Windows 11 and is necessary to run the operating system.

TPM-2.0 is utilized in Windows 11 for just a variety of functions, notably Windows Hello for identification security and Bit Locker for information security. PCs that are powerful enough to run TPM-2.0 are not always configured to do just that. If you’re thinking of switching to Windows 11 tpm, make sure TPM version 2.0 is activated on your computer.

It is switched off by design over most commercial PC motherboards used among developers creating secure own PCs, despite the fact that it is virtually invariably accessible to be configured.

How to Turn on TPM?

Dropping older PCs back when a new version of Windows is released is nothing new, but this specific requirement has many people perplexed because certain devices that should be powerful enough to run Windows 11 well are reportedly unsuitable.

This is partly due to the fact that early versions of Microsoft’s PC Health Check programmed, which notifies users if their system eligible for the installation, simply threw an error if It wasn’t enabled on their computer.

Thankfully, the most recent version will inform consumers if It is the source of the issue. If customers constructed their own PC or had someone do it for them, they can stumble into this problem. It is supported by a large number of motherboards.

To begin, check to determine if particular motherboard model is compatible on the internet.   It should be on the same page as System Model. There are ways to get around the criteria if it isn’t compatible, but they involve some technical know-how and therefore don’t encourage it.

Users can enable it in their system’s UEFI if it’s compatible. This is the low-level software in which users can access temporarily when their machine boots up. When requested after boot up, hit Delete or F12 to allow access to it.

The exact location within those configurations to implement it varies greatly by company, so consult the handbook that arrived with any computer or motherboard.

Secure Boot could also be enabled from either the UEFI menus once here. If user’s computer only enables a compatibility list, it may be called iPPT (Intel Platform Protection Technology) does it have an Octa – core processor or fTPM (Firmware Trusted Platform Module) if it has an AMD CPU?

Restart ones machine after enabling TPM and consider that used the PC Medical Screening programmer afresh. If ones machine is reasonably modern (i.e., it has an 8th-generation Intel Core processor or an AMD Ryzen 2000-series processor or newer), this is likely the one and only thing that brought anyone from updating to Windows 11.

How To Enabled TPM version 2.0 For Windows 11?

  • Enter the Basic Input Output System (BIOS)

Begin by going into the BIOS of one’s motherboard. During startup, hit ‘DEL‘or ‘F2‘to accomplish this. People have gone too far once they are at the Windows load display.

  • Change the Basic Input Output System (BIOS) into Advanced Mode

Users who have the BIOS menu set to ‘Easy Mode’ would want to modify it to innovative configuration. They could do this by clicking the ‘F2’ key in the BIOS or selecting the alternative from the toolbar.

  • Navigate to Settings> Miscellaneous

Simply browse to the preferences bar by selecting it when in innovative configuration. Users will find a ‘various and sundry’ tab in their preferences. To access, double-click.

  • Inside Miscellaneous Settings, enable TPM version 2.0

Users would notice an alternative for ‘Intel Platform Trust Technology (PTT)’ in Unusual, which is Intel’s TPM capability. Actually pick ‘Enable’ from either the drop-down option after clicking it. Users could now effortlessly reboot their computer by going to the ‘Save & Exit’ menu. The next procedures, nevertheless, are indeed essential for a secure Windows 11 implementation.

After users have fully configured TPM version 2.0 in the BIOS,  they will be able to download the Windows 11 development release by joining up for the company’s Inside Program – a sort of first look, locate the flaws, and  know scenarios. Regrettably, if their system will not really accept (or have) a 2.0 module, they will have to either buy a TPM module or install it – or buy a new motherboard entirely.

Read Also- Microsoft Releases Windows 11 Build 22000.434 – Here’s What’s New


It’s as simple as all that! Fortunately, implementing TPM version 2.0 is indeed not complicated, and it just takes some few easy BIOS procedures to do just that. Despite already said, Windows 11 is indeed a far toward away, so it would be impossible to say whether or not such actions will indeed be required when Windows 11 launches.

How do I enable TPM 2.0 and secure boot to install Windows 11?

Select UEFI Firmware Settings from the drop-down menu. Select the Restart option. Based on the motherboard, go to the advanced, security, or boot settings tab. Choose the TPM 2.0 option and then Enable it.

Is TPM 2.0 enabled on my PC?

Start the programme. To open the Trusted Platform Module (TPM) Management console, look for tpm. msc & tap the top result. Confirm “The TPM is ready for use” under the “Status” section to ensure the device has a trusted platform module and it is activated.

Related Articles

0 0 votes
Article Rating
Notify of
Inline Feedbacks
View all comments
Back to top button
Would love your thoughts, please comment.x
Mail Icon